Cangzhou Junxi Group Co., Ltd.
Choose Cangzhou Junxi International Trade Co., Ltd. ,choose success!
Add to Cart
6%/12.5% Thickness Tolerance Hydraulic Tee Buttweld Seamless Pipe Fittings
Product Description:
Butt Welded tee is belonging to the butt-weld pipe fittings which need to do welding when the pipe fittings need to be connected on the whole pipe line . For the surface of the butt welded tee ends ,we need to do the beveling for the convenience of the welding . The welding angle is usually from 0-37.5 degree . We have carbon steel butt welded tee and alloy steel butt welded tee . Now the factory have different size range and different quality for all kind of clients requirement. So we can meet all requirement of our clients.
| Carbon Steel Pipe Fittings |
| Product | 45/90/180degree elbow / tee / cap / reducer / bend |
| Type | seamless/erw/semi-seamless 1D-100D |
| Thickness | sch10,sch20,sch30,std,sch40,sch60,xs,sch80, sch100,sch120,sch140,sch160,xxs |
| Standard | ASME B16.9 ASTM JIS DIN |
| Size | 1/2”-120” |
Company information:
Our company is producer and exporter of all kinds of carbon steel pipe fittings.Our city is the hometown of carbon steel pipe fittings.everyday lots of containers of fittings are dispached all over the world,such as Russia,Egypt,Malaysia,India,Turkey,Indonesia,Jordon and some other overseas markets
tee role:
Tee for pipe fitting, pipe connection.Also called pipe fitting tee or tee pipe fitting,
Stainless steel equal diameter tee
Stainless steel equal diameter tee
Tee joint, used at the main branch pipe.
Three - way is with three openings, namely an import, two exports;Or a chemical pipe fitting with two inlet and one outlet, having t-shaped and y-shaped, equal diameter pipe orifice, and reducing pipe orifice, for use at the junction of three identical or different pipelines.The main function of the tee is to change the direction of the fluid.
Size detection
Measuring diameter: measure the outside diameter of main branch pipe of tee with calipers (outside diameter is measured by circumferential method) and inside diameter at least 3 points at each end to ensure that the main outside diameter, inside diameter, outside diameter of branch pipe and inside diameter meet the standard requirements.
(2) measuring the length of the main pipe: measure the length of the main pipe of the tee with square ruler and straight ruler, at least 2 places.
(3) measuring center height: measure the vertical distance between the branch pipe and the inner slope of the main pipe with a ruler and a square ruler, and make sure that the center height of the tee is half of the main pipe's outer diameter.
(4) measurement of bevel Angle: use universal Angle ruler and ruler to measure the bevel and blunt edge of the main branch pipe end of the tee, which should meet the design requirements of the drawing.
(5) measurement of skew: place the tee in the bending plate so that the main branch pipe rests on the bending plate respectively. Measure the clearance between the bending plate and the end face of the tee with a ruler or a plug, and the value shall meet the standard requirements.
Contact me:
Darcy Dong
Whatsapp/ Wechat: 008615630731167
Guozhong International Limited